Wondering what’s the meaning of a flashing check engine light? Would it turn off itself or you’d need to reset it? If so, how to reset the check engine light on a jeep wrangler? Tap to know!
Are you worried about the flashing check engine light on your dashboard? If so, there might or might not be something to worry about! The issue could be as minor as a loose fuel cap or as huge as an alarmingly overheated engine or faulty camshaft timing.
In most instances, this engine light turns off automatically as soon as the corresponding issue is addressed. However, some consumers have also reported that the check engine light doesn’t turn off.
What should you do in this case? How to reset the check engine light on a jeep wrangler? Is it expensive? Can you do it yourself or have to take the jeep for professional service? Today, we are going to discuss all these things in this blog post. Let’s begin!
In how much time does the check engine light reset itself?
Once the issue is addressed, check engine light on your dashboard reset itself but not instantly. It usually takes your Jeep wrangler to complete ten to twenty cycles successfully before the check engine light gets reset.
For your information, one engine cycle means when you start your Jeep cold and drive it until its engine is warmed and then you switch it off when you’re done with the cruise. Considering this, it will take a lot of time for your vehicle to complete 15-20 cycles after which the check engine light will reset it.
What if your Jeep wrangler checks the engine light won’t turn off itself?
If you are sure that you’ve fixed the corresponding issue and your car has completed fifteen to twenty cycles but still its check engine light is on, you need to reset it yourself using an OBD2 scanner.
It’s true that an OBD2 scanner is quite an expensive tool but you can source a secondhand scanner from a reputable dealer at affordable rates. By purchasing a scanner, you can get rid of the hassle of running to the mechanic every time to reset the codes. Some mechanics also offer to reset your check engine lights for free as they only need five minutes to do so.
What if the check engine light flashes without any error code?
It’s quite simple to uncover the error code associated with the flashing check engine light and doing so will help you understand the issue more clearly. For this purpose, you first need to insert the key into the ignition and turn it to the ON position without starting your Jeep.
Once done, push the key in the ignition further and turn it to the ON and OFF positions three times consecutively. Complete the last cycle on the ON position and let the key push in the ignition. On doing so, the light of your jeep’s dashboard will turn on and you’d be able to see six dashes on the odometer.
Wait for these dashes to disappear after which you’ll be able to see the check engine code that your Jeep has logged in. However, if no code has been logged in by the jeep, the dashboard will show a done sign. In this case, write the check engine light code and you’ll be able to find its meaning.
How to decode check engine light codes with an OBD2 scanner?
With an OBD2 scanner, you can diagnose the exact issue ailing your Jeep Wrangler, without getting submersed in engine oil. Also, the exact diagnosis can save you from fishy mechanics who force you to purchase unnecessary, expensive repairs.
To decode the check engine light code OBD2 scanner, you first need to locate the OBD2 port in your Jeep and plug it into the scanner. Don’t worry since all the post-1996 vehicles come with the scanner port. Before plugging the port in the scanner, make sure your Jeep is running so the software can begin working promptly.
As soon as the scanner is connected to your vehicle, it will ask for some basic information such as the make and model of your vehicle and VIN which is usually located on the driver’s side windshield. After putting in all the required information, it won’t take long for your scanning device to troubleshoot the issue.
As soon as the diagnostic code appears, it will also come with information about the factor causing this issue. This in turn will help you to decide whether you’re fixing the problem yourself or taking it to a dealer. Remember that the more advanced a scanning tool is, the more issues it will uncover.
how to reset the check engine light on a jeep wrangler?
The very first thing you need to do on seeing the flashing check engine lights is to take it to a professional mechanic for a detailed inspection. If you keep on delaying your visit to the mechanic or keep neglecting the light, the issue may get worse, causing more drastic and irreversible damage to your engine.
However, if the check engine light won’t go off, even after fixing the problem, you need to rest it yourself. For this purpose, you first need to open the hood and search for the positive battery terminal. Lose the clamps bolt using a wrench.
Once done, the battery terminal and clamp and make sure it’s not touching the negative side of the battery. Wait for a few minutes after which you can put the positive terminal back to its original setting. After doing so, put the key into the ignition, put it in the ON position for a couple of seconds, and then, crank the engine.
The battery acts as the main energy source for all the modules and capacitors so when you disconnect the battery, all these electronic components lose their memories and revert to the default setting. Generally, it takes a couple of minutes for capacitors to lose all the onboard memory bank and energy. That’s the reason why we were advised to wait for a few minutes before connecting the terminals again.
Leave a Reply